Choosing the Right STEM Degree Course: Investigating the Information Available
This report focuses on progression from post-16 education in schools and colleges into STEM first degree programmes and proposes a number of recommendations for improving levels of communication among the main stakeholders. SCORE commissioned the Centre for Education and Industry, which is based at the University of Warwick,…
The Continuum of Design Education for Engineering
This booklet examines the development of engineering expertise and makes recommendations on ways to harness, encourage, facilitate and reward it. Covering all Key Stages from Foundation Stage to post-16 and higher education, the booklet states the case for design and technology in schools to encourage an understanding of engineering,…
Protecting Your Head
Protecting Your Head, from the Centre for Science Education, is a set of teaching materials which offer a cross-curricular approach to learning about engineering. The context for the activities is the design of head protection for snowboarders where the risk of injury is significant but personal image is also important. Teachers'…
STEM Careers Awareness Guides
These STEM Careers Awareness Guides were designed to provide STEM teachers and careers advisers with an overview of the 'See where they can take you' campaign. This aimed to improve the quality of science, technology, engineering and mathematics (STEM) careers guidance for students, to help them make informed post-16 subject…
Report on the STEM Mapping Review 2004
The purpose of the Science, Technology, Engineering and Mathematics (STEM) Mapping Review, published by the Department for Education in 2004, was broadly to: • investigate whether STEM initiatives currently being taken forward address the concerns raised about the decline in demand of university places in STEM. •…
Case Studies from 2009
A set of case studies which highlight some of the research funded by the Engineering and Physical Sciences Research Council (EPSRC) in 2009. The chocolate powered race car with a green future Energy: The world’s first fully sustainable racing car, developed with EPSRC support, is paving the way for ‘green motorsport’…
Professional Standards for Teachers in England from September 2007
Produced in 2007, these professional standards were intended to help guide teachers' professional development and career choices. The professional standards cover the following career stages: Q – qualified teacher status C – core standards for main scale teachers who have successfully completed their induction…
New Designs for 21st Century Healthcare
A case study from the Engineering and Physical Sciences Research Council (EPSRC) archives which looks at how innovative equipment and vehicle design, supported by EPSRC, could help treat more 999 patients on the spot. Healthcare professionals, called emergency care practitioners, receive special training to assess and treat patients…
Ultra Precision Surfaces
A case study from the Engineering and Physical Sciences Research Council (EPSRC) archives which looks at advanced engineering techniques, pioneered by EPSRC-supported research teams, which are increasing product possibilities and creating new manufacturing opportunities. ‘Ultra Precision Surfaces’ are considered perfect…
Self Healing Planes
A case study from the Engineering and Physical Sciences Research Council (EPSRC) archives which looks at how ailing aircraft could heal themselves during flight thanks to a revolutionary new system. The technology, that mimics the healing processes found in nature, has been developed by aerospace engineers at Bristol University,…
New Microprocessor Could Extend Battery Life
A case study from the Engineering snd Physical Sciences Research Council (EPSRC) which looks at how MP3 players and 4G mobile phones could be more energy efficient thanks to a versatile microprocessor, developed as part of a project funded by EPSRC at the University of Edinburgh. Designed using a new automated approach the processor,…
Suspension Innovation for a Safer Journey
A case study from the Engineering and Physical Sciences Research Council (EPSRC) which looks at an innovative suspension system component that is boosting the performance of Formula One cars and improves comfort and safety in road cars, motorbikes and trains. Called the inerter, the component emerged from EPSRC-funded research undertaken…
Cracking Crime Faster
A case study from the Engineering and Physical Sciences Research Council (EPSRC) which looks at the forensic evidence and intelligence that are left at crime scenes by footwear, gloves, tyres and fingers. New Latent Image Markup and Analysis (LIMA) software provides a fast, accurate way of transmitting and enhancing images of these…
Wind Turbine Project: Component Parts
From the Technology Enhancement Programme (TEP), these images show the manufactured components, jigs and fixtures required to make the wind turbine project. Detailed drawings for the wind turbine can be found at this resource: wind turbine working drawings. Images include: • Front and side views • Propeller assembly •…
Wind Turbine Project: Working Drawings
Produced by the Technology Enhancement Programme (TEP) these are the working drawings for producing a working wind turbine in the workshop. The turbine consists of six 130mm blades arranged on a central axle and attached via plastic gears to a dc generator. A total of twelve, detailed drawings are included. These cover: •…
Wind Turbines: Industrial Manufacturing
These materials, from the Technology Enhancement Programme (TEP), consist of a series of photographs that illustrate the installation of wind turbines in an offshore wind farm just off the coast of North Wales. The images can be used to illustrate a range of manufacturing and engineering processes as well as the sequence of events…
Careers Examples and Options
These two Future Morph resources aim to show students that there is a wide choice of options open to those who study sciences and mathematics.The resources consist of: Career examples list The list covers six areas of science: • Living things • Environmental science • Energy and motion • Natural and man-made…
Relative Difficulty of Examinations in Different Subjects
Published by Durham University, this report reviews the evidence on whether examinations in some subjects can legitimately be described as ‘harder’ than those in other subjects. In particular, whether STEM subjects (those that form a foundation for further study in science, technology, engineering and mathematics) are…
The Large Hadron Collider (LHC)
From the Science and Technology Facilities Council (STFC), the 'Big questions, big experiment' wall chart describes the Large Hadron Collider (LHC) at CERN. It looks at the "big questions" about our Universe that scientists are trying to answer, and how the amazing LHC will help them to do so. The 'Tunnel…
4/5- Publication year: 2000 - 2009
- Poster
Engaging Maths
A resource from the Engineering and Physical Sciences Research Council (EPSRC) which explores the role of the mathematical sciences in our lives - in security, telecommunications and the internet, the environment, finance and economics, industry, transport and travel, and in medicine and biology. Contents: Introduction: why maths…
Young Women in Science
Young Women in Science was developed by the Learning and Skills Improvement Service (LSIS) as part of the Teaching and Learning Programme. This research supports the implementation of gender inclusive teaching strategies. The case studies in this resource include: • video support in AS physics • response of female…
Post-16 Participation in STEM Subjects: Interim Report
Published by LSIS, this report gives interim findings from a programme investigating the gap between the numbers of learners studying science, technology, engineering and mathematics (STEM) in schools at A Level, and those studying in Further Education (FE). This interim report provides insight into barriers to progression in…
Improving Teaching and Learning in STEM Subjects
Published by LSIS, this report describes a project carried out by St Helens College. The project's aim was to improve the teaching and learning methods used in theory sessions across the STEM subject areas. The vehicle for improvement was in planning, embedding and applying differentiated learning methods.
The Development of Interactive Teaching Packages in Physics/Mathematics
Published by LSIS, this report describes an action research project carried out at Richard Huish College. This project was a study into how feasible it would be to produce interactive materials by non-computing specialists. Such resources can be made to fit a teacher’s exact requirements and students gain access to materials…
Equality and Diversity
These two videos from Teachers TV look at how colleges and schools can turn diversity and equality policies into practice. Three colleges share the strategies they have successfully adopted. From supporting students with dyslexia to providing integrated learning for divided communities, colleges must address the diverse needs of…
- 3/5
- Publication year: 2000 - 2009
- Video
STEM Choices: Equality and Diversity - Ethnicity
This publication from the Department for Education addresses the issue of equality and diversity in the STEM workforce which is not yet truly representative. It examines the number of ethnic minority students studying STEM subjects and undertaking STEM-related careers. The publication looks at approaches such as role models, science…
STEM Choices: Equality and Diversity - Gender
This publication from the Department for Education publication explores the issue of a significant gender imbalance in the STEM workforce, barriers to choosing STEM subjects and gender disparity. A list of suggestions to make STEM careers advice more women - friendly is also provided.
Leading Practice in STEM
This publication from the SSAT's STEM Pathfinder programme describes the approaches that the forty participating schools developed to embed 'STEM' learning. The examples include successful STEM practice for parents, students, and other people who work with schools and academies, including industry and higher education. Accompanying…
STEM Careers Awareness Leaflet
From the Centre for Science Education and the National STEM Centre, this leaflet provides some prompt questions that introduce creative and practical ways of raising STEM careers awareness. There is information on working with partners and also where further resources can be found.
Embedding STEM Careers Awareness in Secondary Schools
This publication, from Warwick University, reports on the STEM Careers Awareness Timeline Pilot. The Timeline project seeks to establish how schools can embed a more systematic programme of careers awareness into the existing subject curriculum. The report gives emerging findings from working with stakeholders and schools.
Work Experience in the NHS
Produced by NHS Careers, this toolkit provides background information and advice for schools and other organisations involved in arranging work experience for students in the NHS.
Work Related Learning Guide
Produced by the former Department for Children, Schools and Families, this work-related learning guide is aimed at young people and their parents or carers, employers, primary and secondary schools and colleges, and Education Business Partnership Organisations. The guide includes information on providing work-related learning and…
Filter results by...
Subject
Publication year
Type
Publisher
- Business and Education South Yorkshire (1)
- Centre for Evaluation and Monitoring (1)
- Centre for Science Education (17)
- Department for Education (11)
- Engineering and Physical Sciences Research Council (9)
- Engineering Council (1)
- Future Morph (1)
- Gatsby Charitable Foundation (1)
- Gender Equality and Race Inclusion Project (1)
- JIVE (1)
- Learning and Skills Improvement Service (LSIS) (4)
- London Engineering Project (2)
- NASA (1)
- National STEM Centre (1)
- NHS Careers (1)
- Science and Technology Facilities Council (1)
- SSAT (3)
- Teachers TV (2)
- Technology Enhancement Programme (3)
- Training and Development Agency for Schools (1)