Crest Challenges
This Challenge Pack from the British Science Association, aims to give students aged 11-16 and their teachers and educators support to create a science, technology, engineering or maths (STEM) project that they can enter into the National Science + Engineering Competition. Through creating a project, young people can explore…
Hunting and Gathering for Ideas
This resource describes an outdoor activity which can be used to introduce students to the concept of biomimicry. Janine Benyus, founder of the Biomimicry 3.8 Institute, explains how systematically observing nature and then emulating it can lead to innovative and sustainable technologies and designs. She describes how to conduct…
The Whole Curriculum in Primary Schools
Published in 1993 by the Association for Science Education, this report was a response to concerns about primary curriculum overload and the place of science as a core subject within the curriculum. A task group including practising teachers, a primary head teacher, a science adviser, lecturers and researchers in primary education…
ARKive School Museum (Age 11-14)
Produced by ARKive, this series of activities teaches students about endangered species through the creation of an interactive museum. The ARKive School Museum presentation looks at examples of endangered species and explains the concept of an ARKive School Museum. Students then research an endangered species using the ARKive…
Shelter for the World
This resource pack introduces the concepts of shelter and shelter deprivation around the world to students in Key Stage Two. It highlights the challenges people face in their daily lives when their homes do not provide adequate shelter. It linked to the curriculum areas of design and technology, geography and PSHE and promotes thinking…
Module 6: Aiming Higher
Module 6 of the STEM Projects Toolkit gives information on the many opportunities that students can take to present their projects in STEM competitions and fairs. The resource describes the practical steps to be taken to make a project ready for a competition or fair, including describing what the judges would be looking for. Contents 6.1…
Module 5: From the Classroom to the STEM Fair
Module 5 of the STEM Projects Toolkit explains the steps that can be taken between students carrying out projects in their own classes and presenting a project at a STEM competition or fair. Although this can be a daunting prospect, it can give students a positive experience of presenting themselves and their work professionally…
Module 4: Characteristics of Good Project Work
This module of the STEM Projects Toolkit explains what a good project provides for students, encouraging them to develop independent learning skills and reflective practice. This part of the toolkit provides the first practical steps for teachers and technicians in conceiving and developing a STEM project. Contents 4.1 What is…
Module 3: Moving From Teacher-led to Student-led Lessons and Projects
This module of the STEM Projects Toolkit considers how to move from traditional teacher-led individual lessons to student-designed and student-led inquiry based lessons and projects. The emphasis is on guiding students and encouraging them to explore and research topics, actively participate in the learning process, collaborate and…
Module 2: Models of Student-centred Inquiry
This module, from the STEM Projects Toolkit, considers the use of the inquiry-based approach in everyday teaching of STEM subjects, encouraging students to use initiative and make independent decisions. The resource compares different types of Inquiry Based Learning and includes approaches for differentiation and inclusion. Contents 2.1…
Module 1: Getting Started With STEM Inquiry Work
This module introduces the STEM Projects Toolkit, its background and its goals. A schematic diagram shows the contents of the resource pack, showing the pathways which teachers and technicians can use to access information and enrich lessons. The resource builds on the successes of the CREST Awards, a formal project award scheme,…
Medical Compression
In this activity, students investigate the uses of materials and fabrics in medical applications, such as pressure bandages for burns injuries and anti-embolism stockings for deep vein thrombosis. The students make their own pressure sensor using different types of fabric. They then calibrate their sensor and create a calibration…
Fabric Fires
The Fabric Fires activity for Key Stage Three students looks at how different fabrics catch fire and burn. Students are asked to first consider the commonest reasons for fires in the home. They then test and compare a fabric and a cotton wool ball, firstly when untreated and then having first soaked them in a fire retardant solution.…
Construction - Build It!
From the Centre for Science Education, the RA3 project aims to bring parents together with their children and teachers to explore the worlds of science and technology. The aim of this activity is to help children and parents think about the area they live in and how it could be improved. They work together to design and make new…
Green Fairgrounds
The RA3 project, provided by the Centre for Science Education, aims to bring parents together with their children and teachers to explore the worlds of science, technology, engineering and maths. This investigation helps to develop an awareness of green power by designing and making a new fairground ride which is self-powered.…
Women and Science and Technology
Written by Gwyneth Hughes and produced by the Association for Science Education (ASE), this resource pack looks at the role of women in science and technology. It consists of thirteen worksheets examining some of the issues around gender, science and technology. The pack is primarily aimed at women. Its main purpose is to give…
Corrosion: the Virus of Engineering
From the Technology Enhancement Programme (TEP), this publication looks at the process and problems caused by the corrosion of metals. The first part of the publication gives background information for students on elements, atoms, ions and electrochemical reactions involved in rusting. This helps students to understand how different…
Flywheels in Engineering
This publication, from the Technology Enhancement Programme (TEP), looks at the topic of flywheels and how they can be used to store or smooth energy flows. The book initially provides information for students on the following topics: • The energy-storage system • Cyclicity of supply • Energy and system energy…
Nuffield Home Economics: Nutrition
Nutrition was one of the four topics that featured as a separate area of study in the Nuffield Home Economics course for students aged 14–16. The course emphasised the influence of food choice on health. The authors appreciated that entrenched attitudes to food and feeding are as likely to influence dietary practice as reasoned…
Crash Site Investigation
Produced by Innovate Educate and Aviation Heritage Lincolnshire, these materials challenge students to investigate the evidence from the crash site of Lancaster bomber PD259. This activity should be treated sensitively. Whilst it looks at an incident that happened over 60 years ago, it should be remembered that lives were lost during…
Communications and Radar
Produced by Innovate Educate and Aviation Heritage Lincolnshire, these materials allow students to investigate circuits using communication as a context. The principles behind radar are also examined. The activities can be used individually or together in a series of sessions. The activities are: Using electric circuits to…
Can It Fly?
Produced by Innovate Educate and Aviation Heritage Lincolnshire, these materials can be used to encourage children to think about what types of things can fly. There are three activities. Each activity is self-contained, and so can be run individually, or as a sequence of activities. The activities look at: Can it fly? Children…
Aviation Development
Produced by Innovate Educate and Aviation Heritage Lincolnshire, these materials allow primary children to consider the science and technology behind the development of flying machines. This encourages the investigation of forces and movement as well as looking at how products can be evaluated. There are five activities and each…
Aircraft Structures
Produced by Innovate Educate and Aviation Heritage Lincolnshire, these materials allow students to investigate forces, motion and the use of resistant materials to make structures. There are four activities which can be used in sequence or individually. Helium balloons and lift Students look at the development of flying machines…
UNESCO Resource Kit - Science and Technology Education
This folder of guidance and resources was published for UNESCO by the Association for Science Education. The resources consisted of 26 modules each with Student’s Notes and Teacher’s Notes. UNESCO Project 2000+ was a collaborative partnership between eleven major international agencies and inter-governmental organisations…
Recycling Cities
Produced by CIEC Promoting Science, these activities help students to examine the recycling of materials, concentrating on polymers and the potential for the recycling of waste plastics. In doing so, students look at polymers, the properties of plastics, purifying components of a mixture, waste disposal and sustainable development.…
Polymers: Information and Activity Book
From CIEC Promoting Science, this book is aimed at post-16 chemistry students but will also be useful for students following technology or vocational courses. The book helps students to first understand the basis of polymer chemistry and the plastics industry. It moves on to consider detailed information on individual polymers, including…
Polymers: Physical Testing
From CIEC Promoting Science, these activities are aimed at post-16 students following courses in technology, engineering, physics or materials science. The activities described allow students to gain experience and practice experimental technique in the testing of materials' physical properties. The tests include: • Compression…
Product Design: Polymers in Sleeping Bags
Produced by CIEC Promoting Science, this set of activities allows students to investigate the properties of polymers in relation to the design requirements for a sleeping bag. Students carry out an investigation of the design and manufacture of sleeping bags as a product analysis exercise. This helps students to develop technological…
Speakers from Industry: a Practical Guide for Teachers and Industrialists
Produced by CIEC Promoting Science, this booklet offers advice and guidance for: • teachers who wish to bring industrial speakers into school • industrial speakers who would like an insight into the needs of teachers and their students. The booklet contains two sections that deal with: Part I - a general guide…
Plastics: Workshop Practices and Industrial Processes
Produced by CIEC Promoting Science, this booklet contains information and activities of interest to teachers of design and technology. It looks at working practices in industry and schools relating to thermoplastics and provides an introduction to basic techniques for schools and the more common processes found in industry. The…
Understanding Sensors
This is one of a series of focused units, from the Association for Science Education and the Design and Technology Association, to introduce students to important technologies and their applications. This unit features sensors and their technological applications including: • the use of potential dividers as a resistance to…
Filter results by...
Subject
- Science (157)
- Biology (27)
- Chemistry (15)
- Physics (34)
- Earth science (7)
- How science works (18)
- Practical work (19)
- Enquiries & investigations (17)
- Outside the classroom (1)
- Techniques & procedures (3)
- Technology (157) Close
- Control systems (3)
- Electronics (6)
- Food technology (21)
- Product design (1)
- Resistant materials (3)
- Textiles (4)
- Design skills (4)
- Engineering (44)
- Mathematics (25)
- Psychology (2)
- Careers (18)
- Cross curricular (6)
- Computer Science (1)
Publication year
Type
Publisher
- ARKive (1)
- ASE (58)
- Aviation Heritage Lincolnshire (5)
- Becta (1)
- Biomimicry 3.8 (1)
- BP Educational Service (1)
- British Science Association (16)
- Centre for Science Education (7)
- Chilled Food Association (14)
- CIEC Promoting Science (6)
- Comino Foundation (1)
- Council for British Archaeology (1)
- CREST Awards (6)
- Department for Education (3)
- Design and Technology Association (12)
- Engineers Without Borders UK (1)
- Future Morph (10)
- Gender Equality and Race Inclusion Project (1)
- Google in Education (1)
- Heinemann (1)
- Hutchinson & Co (1)
- Innovate Educate (5)
- Intel (3)
- Learning and Skills Improvement Service (LSIS) (1)
- Macdonald Educational (7)
- NASA (5)
- Nuffield Foundation (5)
- Planet Science (3)
- Practical Action (4)
- Qualifications and Curriculum Authority (3)
- Rolls-Royce (2)
- Schools Council (3)
- Science Council (4)
- Science Museum (1)
- Spacelink Learning Foundation (1)
- SSAT (2)
- Technology Enhancement Programme (2)
- Training and Development Agency for Schools (1)
- University of York Science Education Group (1)