Improving Young People's Engagement with Science, Technology, Engineering and Mathematics (STEM)
This paper, published to coincide with Science and Engineering Week 2013, presents evidence from research carried out by the National Foundation for Educational Research (NFER) to explore how to encourage further engagement in, and take-up of, STEM subjects. It discusses why STEM education is important and looks at how policymakers,…
Supporting Scotland's STEM Education and Culture: Second Report
This report, published by the Science and Engineering Education Advisory Group in January 2012, addresses many of the challenges and opportunities arising in implementation of the Scottish Curriculum for Excellence (CfE) as it affects the delivery of STEM education and engagement. It examines the ways in which STEM education may…
Second Report of the Independent Review of Teachers' Standards
This report sets out the recommendations of an independent Review of Teachers’ Standards, chaired by Sally Coates. The review was launched by the Secretary of State in March 2011 with a remit to review the existing framework of professional standards for teachers. The Review Group comprises excellent teachers, head teachers…
Ready to Grow: Business Priorities for Education and Skills
This is the third education and skills survey published by the Confederation of British Industry (CBI). The survey provides an authoritative barometer of business opinion on key education and skills issues. It was conducted in February 2010, with responses received from 694 employers, collectively employing over 2.4 million people,…
STEM Careers Review 2010
This review of STEM careers, led by John Holman, was funded by the Gatsby Charitable Foundation in February 2010. The review covered provision of STEM careers education, information, advice and guidance in England. The report focused on secondary and further education, but recommended the need to commence careers related work from…
Global Grant-Making: a Review of UK Foundations' Funding for International Development
This report published by the Nuffield Foundation in January 2012 provides an up-to-date picture of the scale of UK foundation resources devoted to international development. It also identifies how these resources are distributed across region and need, and how foundations approach international funding activities. Commissioned…
Evaluation of the Wellcome Trust Camden STEM Initiative
This report, published in March 2012 by the National Foundation for Educational Research, presents the findings of an evaluation of the Wellcome Trust’s Camden Science, Technology, Engineering and Mathematics (STEM) Initiative which provided funding to eight Camden schools to develop interdisciplinary projects. Projects…
Subject Choice In STEM: Factors Influencing Young People (Aged 14-19) in Education
The Evidence for Policy and Practice Information and Coordinating Centre (EPPICentre) was commissioned by the Wellcome Trust to undertake this systematic review of research about subject choice. The main aim of the review was to examine the factors that influence the STEM subject choices of young people (14-19 years) in education…
Issues in Design Education
Issues in Design Education comes from the Art and Design Education series and was published in 1990 by Longman. It consists of a series of essays written by design and technology education specialists, each one considering an aspect of the technology curriculum. The purposes of this volume were: • To identify the issues…
Design and Technology: the National Curriculum - Key Stages 1-4 (1999)
The 1999 edition of the Design and Technology National Curriculum included set out clearly the programmes of study and attainment targets for Key Stages One to Four. It sets out the importance of design and technology education to students' performance across the curriculum in promoting social, moral and cultural development…
The Continuum of Design Education for Engineering
This booklet examines the development of engineering expertise and makes recommendations on ways to harness, encourage, facilitate and reward it. Covering all Key Stages from Foundation Stage to post-16 and higher education, the booklet states the case for design and technology in schools to encourage an understanding of engineering,…
Tackling Obesity
With childhood obesity rising, this programme from Teachers TV looks at how schools can tackle the issues surrounding the problem. Addressing whether schools should help to identify children at risk of obesity, the programme looks at the results of a new law in Arkansas, which allows the state's schools to directly contact…
Education for a Technologically Advanced Nation: Design and Technology in Schools
This report evaluates design and technology provision based on a three-year evaluation of design and technology in primary and secondary schools. Evidence was drawn from school inspections during the period 2004–05 as well as from focused surveys by Her Majesty’s Inspectors (HMI) from 2004 to 2007. The surveys evaluated…
Meeting Technological Challenges?
This report draws upon evidence from design and technology (design and technology) subject survey visits by Her Majesty’s Inspectors (HMI) to primary and secondary schools between September 2007 and July 2010. The inspections evaluated how well the subject was meeting its National Curriculum aims and promoting high levels of…
Subject Professional Development Materials: Design and Technology
This resource from Ofsted is aimed at subject leaders to help improve teaching and learning by reflecting on the main messages from the design and technology report, Meeting Technological Challenges? The resource draws upon evidence from design and technology subject survey visits by Her Majesty’s Inspectors (HMI) to a range…
Quality in Design and Technology 1993
Produced in 1993, this leaflet was written by the National Curriculum Council for teachers of design and technology at all four Key Stages. It aimed to stimulate lively and useful discussion amongst educationalists and technologists. It briefly raises and summarises different issues and factors that influence planning, teaching,…
Craft, Design and Technology from 5 to 16 (Curriculum Matters 9): 1987
Produced in 1987, this document written by the Department for Education and Science and HM Inspectorate was intended to stimulate a professional debate and to contribute to reaching national agreement about the objectives and content of the school craft, design and technology curriculum of the time. Context The Government had…
Report on the STEM Mapping Review 2004
The purpose of the Science, Technology, Engineering and Mathematics (STEM) Mapping Review, published by the Department for Education in 2004, was broadly to: • investigate whether STEM initiatives currently being taken forward address the concerns raised about the decline in demand of university places in STEM. •…
Planning, Teaching and Assessing the Curriculum for Pupils with Learning Difficulties: Design and Technology
Produced by the Qualifications and Curriculum Authority in 2009, this guidance supports the planning, development and implementation of the curriculum for students with learning difficulties. It draws on effective practice across a range of schools and can be used in mainstream and special primary and secondary schools, specialised…
Professional Standards for Teachers in England from September 2007
Produced in 2007, these professional standards were intended to help guide teachers' professional development and career choices. The professional standards cover the following career stages: Q – qualified teacher status C – core standards for main scale teachers who have successfully completed their induction…
Fighting Crime Through More Effective Design
This case study, from the Arts and Humanities Research Council (AHRC), examines the impact of grant awarded to the Design Against Crime Research Centre at the University of the Arts, London. The Centre works on solutions to reduce criminal activity through the effective design of places, products, communications and services. The…
Design and Technology: National Curriculum for England 2004
This Qualifications and Curriculum Authority (QCA) document contains the 2004 revision of the Design and Technology National Curriculum. As with previous documents, there were no substantial revisions, and none at all to the Attainment Target statements. The role of CAD-CAM and new materials continued to be emphasised. Sustainability…
Technology Programmes of Study and Attainment Targets: Recommendations 1993
Produced in 1993, this National Curriculum Council document was written to respond to the Secretary of State for Education’s proposals to address issues with the National Curriculum for technology at the time. The key responses to the proposals include: • The scope of ‘technology’– clarifying the…
Technology Key Stages One, Two and Three: A Report on the First Year 1990-91
Produced in 1992, this Department for Education and Science and HM Inspectorate document evaluates the response of schools to the National Curriculum requirements for technology since its introduction in 1990. The report is based on the inspection of 884 schools: 438 secondary, 25 middle, 398 primary and 23 special, in 95 local education…
Technology in Schools: Developments in Craft, Design and Technology Departments 1982
Produced in 1982, this Department for Education and Science and HM Inspectorate booklet describes some aspects of technological studies in 90 schools in England and Wales. It gives information about the structure, content and organisation of courses in technology, and about some other ways in which schools attempted to introduce…
Report on National Curriculum Council Construction: Technology 1993
A report from the National Curriculum Council (NCC). The change in approach was in turn widely criticised by respondents, and further revisions made by the NCC. While the move towards two Attainment Targets (ATs) and the separation of Information Technology was accepted, there were wide concerns about perceived male bias, lack of…
Technology for Ages 5 to 16: Proposals of the Secretary of State 1992
Following the establishment of the 1989/90 National Curriculum for Design and Technology, the Secretary of State for Education and Science and Secretary of State for Wales made proposals regarding the revision of the National Curriculum for Design and Technology. The key proposals were: • the number of Attainment Targets…
National Curriculum Technology: the Case for Revising the Order 1992
A report from the National Curriculum Council (NCC). During 1991 it became apparent that teachers were struggling to deliver the requirements of the design and technology National Curriculum, primarily in terms of its conceptual intentions, wide and extensive coverage and issues regarding the re-structuring and resourcing of departments.…
National Curriculum Design and Technology Working Group: Interim Report 1988
A report from the National Curriculum Council (NCC). An initial consultation report in November 1988 proposed an ambitious, broad, integrated approach to a range of design and technology-related subjects explored through a wide variety of contexts. It recognised the complex relationship between the knowledge and skills and the practical…
Design and Technology for Ages 5 to 16: Proposals of the Secretary of State 1989
A report from the National Curriculum Council (NCC). The final proposals published in June 1989 added considerable detail to the new approach, and made some minor alterations to the Attainment Targets. There are four main sections in this document: 1. Design and technology in the National Curriculum 2. Profile components, attainment…
Filter results by...
Subject
Publication year
Format
Publisher
- Arts and Humanities Research Council (1)
- CBI (1)
- Department for Education (14)
- Engineering Council (1)
- Gatsby Charitable Foundation (1)
- Longman (1)
- National Curriculum Council (1)
- National Foundation for Educational Research (1)
- Nuffield Foundation (1)
- Ofsted (3)
- Qualifications and Curriculum Authority (1)
- Scottish Government (1)
- Training and Development Agency for Schools (1)
- Wellcome Trust (2)